Sound barrier perforation

Sound barrier perforation

Perforated sound barrier hole type is mainly divided into louvered hole sound barrier, round hole sound barrier two types of holes. The perforation type we often see in high speeds, neighbourhoods and factories is dominated by louvered holes.　　The noise reduction effect is better for the high frequency sound greater than 2000Hz than the medium frequency sound around 800-1000Hz, but for the low frequency sound around 25Hz. However, for low frequency sound around 25Hz, the effect is poor because the wavelength of sound is long and it is easy to bypass from the top of the barrier. Usually, the sound barrier can reduce the high frequency sound by l0-15dB. The height of the sound barrier can be designed according to the distance between the sound source and the reception point, and the height of the sound barrier can be doubled, so the noise reduction can be reduced by l0-15dB.

Classification:

Sound Barrier Products

Keywords: highway guardrail, sound barrier, photovoltaic support

Inquiry
Products

Product Details

Perforated sound barriers are mainly divided into two types of holes: louvered holes and round holes. The perforation type we often see in highways, neighbourhoods and factories is dominated by louvre holes. 　　

The noise reduction effect is better for high-frequency sound greater than 2000Hz than for medium-frequency sound of about 800-1000Hz, but for low-frequency sound of about 25Hz, the noise reduction effect is better due to the longer wavelength of sound wave. But for the low frequency sound around 25Hz, the effect is poor because the sound wavelength is long and it is easy to bypass from the top of the barrier. Usually, the sound barrier can reduce the high frequency sound by l0-15dB. The height of the sound barrier can be designed according to the distance between the sound source and the reception point, doubling the height of the sound barrier, the noise reduction can be increased by 6dB, in order to make the noise reduction effect of the noise barrier is better, it should be as close as possible to the source of the sound barrier or the reception point.

Hot Products

Climbing frames under the rainbow

Climbing frames under the rainbow

Thermal Processing Triple Tube Tower

Thermal Processing Triple Tube Tower

Hot-dip galvanised fabricated components

Hot-dip galvanised fabricated components

Plastic spraying spiral pipe

Plastic spraying spiral pipe

Welcome to your message we will reply to you between the first!

submit