Contact Us
weaver
Mingxin Procurement
中文版
Home
About
Company Profile
Company Culture
Enterprise Honor
Products
Highway Products
Sound Barrier Products
Photovoltaic Products
Hot-dip Galvanized Processed
Climbing Frame Products
Case
Freeway
High Speed Railroad
Other Cases
News
Enterprise Dynamics
Media Attention
Pipe Information
High-speed Information
Recruitment
Talent Philosophy
Talent Recruitment
Contact
Contact Details
Sales Network
Online Message
Media attention
High-speed information
How to install guardrail plate column project
2016-10-19
1, column sampling: 1, (1) according to the design drawings and road base unit provided by the road centre line and elevation data sampling, and bridges, attempts, culverts and other control points for measurement and positioning (2) has been implemented in part of the shoulder wall and the outer retaining wall due to the inconsistency of connecting lines, in order to ensure that the waveform guardrail of the smoothness of the original shoulder wall needs to be added to the outside of the concrete or slurry masonry chip to join the smoothness of the original shoulder wall. (3) Survey the whole line shoulder reserved hole, in principle, in the shoulder construction unit reserved hole position to install guardrail columns. If the location of the original hole does not meet the requirements or not leave a hole, first report to the supervising engineer and re-establish the construction method of the guardrail column. 2, column installation (
Specification and weight of corrugated beam guardrail_Jiangsu Guoqiang provides the following reference
2016-10-18
(1) Guardrail plate: plate length × plate width × wave height × plate thickness A, double-wave guardrail plate: 4320 × 310 × 85 × 3.0 Theoretical weight 49.16Kg 4320 × 310 × 85 × 4.0 Theoretical weight 65.55Kg B, triple-wave guardrail plate: 4320 × 506 × 85 × 4.0 Theoretical weight 102kg (2) Column: 114/140 × 4.5 × length Diameter×Wall thickness×Length Length:1m,1.2m,1.25m,1.55m,1.85m,1.95m,2m,2.15m,etc.Theoretical weight(4.5mm thick)
Highway guardrail plate raw materials
2016-10-17
Highway guardrail plate raw materials] Highway guardrail plate is generally used waveform beam guardrail plate, the metal material is made of carbon structural steel cold-formed, the index is not less than GB/T 700-2006 "carbon structural steel" in the Q235 steel requirements. The surface is generally hot dip galvanised or plastic coated to prevent rust.
Highway guardrail plate will reflect cause
2016-10-16
Highway guardrail every bit of distance on the signage made of reflective materials, normal straight section 50 m 1, 20 m 1 curve, ramp 5 m / a, with a very obvious warning effect, this signage surface coated with a layer of reflective rate of high fluorescent paint, can be various angles of incidence of light reflection out of the relative concentration of parallel light. In the absence of light conditions will show very dark, once there is light shot to the surface of the signage, it will shoot back in the direction from which it came. Highway in front of the role of reflective panels, road width, corner, slope at a glance!
Highway guardrail plate why is wave-shaped
2016-10-15
Waveform guardrail plate construction precautions
2016-10-14
Waveform guardrail plate construction precautions 1). Construction preparation should be sufficient, construction section pile number location to find accurate. Sampling should be accurate, the error is within the specified range. 2). Column construction should be strict and careful, its verticality, spacing, bolt hole location and other dimensions should meet the requirements, do not meet the requirements need to rework immediately, at the same time, should be strictly in accordance with the provisions of the specification JTJ074-94 rework. 3). Waveform beam plate, column and other components of the packaging and marking should be in line with the provisions of GB6725. The guardrail shall not be bulked when purchased, and it should be ensured that the products are not deformed or damaged (injured) during lifting, transport and stacking.